Daily Collection Kettle

Daily Collection Kettle

1.6 L 2400 W, Water level indicator, Black, Hinged lid HD9300/90


It takes a long time for my Philips kettle to boil water

If boiling water with your Philips kettle takes a long time, the heating element of the kettle is probably covered with scale. Discover how to easily resolve this.

To remove the scale we advise you to descale the kettle

You can use white vinegar to descale the kettle. See descaling instructions below.

Note: Never use natural vinegar or white vinegar with an acetic acid content higher than 8%, as this may damage the inside of the kettle. If you dislike the smell of vinegar, use citric acid or a descaling agent. In that case, follow the instructions on the package of the descaler.

Descaling instructions with white vinegar:

  1. Fill the kettle with water up to three-quarters of the maximum level and bring the water to the boil.
  2. After the kettle has switched off, add white vinegar (8% acetic acid) to the maximum level.
  3. Leave the solution in the kettle overnight.
  4. Empty the kettle and rinse the inside thoroughly.
  5. Fill the kettle with fresh water and boil the water.
  6. Empty the kettle and rinse it with fresh water again.
  7. Repeat the procedure if there is still some scale in the kettle.

Note: Regular descaling prolongs the life of the kettle.

If this answer does not help to resolve your problem, we advise you to contact Philips Consumer Care in your country.

The information on this page applies to the following models: HD9300/90 , HD4644/00 , HD4671/20 , HD4644/60 , HD4671/60 , HD4646/00 , HD9300/00 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.