If you notice that your Philips Air Purifier makes an unusual noise, please read the article for possible causes and solutions.
To clean the standalone filters, you can follow the steps below:
Switch off the appliance and unplug it from the wall outlet.
Pull the bottom part of the panel (the front or the back part of your purifier) to remove it from the appliance
Press the two clips down and pull the pre-filter towards you (see image below)
Wash the pre-filter under a running tap. If the pre-filter is very dirty, use a soft brush to brush away the dust
Air dry the pre-filter until it is completely dry.
To clean the cylindrical filter, you can follow the steps below:
1. Switch off the appliance and unplug it from the wall outlet.
2. Pull on the back cover and remove it from the appliance.
3. Clean the surface of the filter with a vacuum cleaner.
4. Put the filter back into the appliance.
5. Reattach the back cover.
When the wrapping plastic is not removed from a filter, this might cause an unusual noise. Please make sure that there is no plastic wrapping left covering the filters.
The air inlet or outlet may be blocked by external objects. Please check and make sure that the air inlet and outlet are unobstructed.
If none of the above situations apply, then there may be a technical issue with your purifier. In this case, please contact us.
The information on this page applies to the following models:AMF765/30 , AMF870/35 , AC1715/30 . Click here to show more product numbers ›
