How do I use the Philips Coffee oil remover tablets?

To find out step-by-step instructions on how to use the Philips Coffee oil remover tablets, read our article below.

Switch ON the machine
Fill the water tank with tap water to the max indicator and place a cup under the coffee spout
Put one coffee oil remover tablet in the pre-ground coffee compartment
Select the pre-ground coffee function
Select coffee and start brewing. When half a cup of water has been brewed, unplug the machine
Let the coffee oil remover solution act for at least 15 minutes. Insert the mains plug back into a wall socket and switch on the machine. The machine will start heating up and perform an automatic rinse.
Open the service door and remove the brew group.
Rinse the brew group thoroughly with tap water
Reinsert the brew group into the machine and put a cup underneath the coffee spout
Select the pre-ground coffee function again and do not add any pre-ground coffee
Select coffee and start brewing. The machine will dispense some water. Repeat this step twice.

The information on this page applies to the following models: HD8833/11 , HD8856/01 , RI9833/11 . Click here to show more product numbers ›

Frequently Asked Questions

Looking for something else?

Discover all Philips Support options