My Philips Air Purifier does not improve the air quality
Published on 30 December 2022
If the air quality does not improve or the air quality light does not turn blue when using your Philips Air Purifier, find out the possible causes and solutions here.
Note: All images shown below are generic representations only; there can be some differences among specific appliances.
Packaging material has not been removed
Packaging material needs to be removed from the filters of your Philips Air Purifier. Please remove all packaging materials as shown in the below picture.
The standalone filters are not placed correctly
The filters need to be placed in the right order and direction for your Philips Air Purifier to function correctly. Please check the numbers and then place the filter back with the tag pointing towards you.
In the image below you can see an example of the filters our air purifiers contain (some do not contain filter B). Please check the User Manual specific to the model of your Philips Air Purifier to find out which filters it contains.
The air quality sensor is dirty or wet
The air quality sensor in your Philips Air Purifier (indicated as figure 1 in the image below) should be dry and clean. Please check and clean it with a cotton bud if necessary.
The location of the sensor on the appliance is different. Please refer to the User Manual specific to your model.
Make sure that the pre-filter is clean
If your Philips Air Purifier contains standalone filters, please wash the pre-filter under a running tap. If it is very dirty, use a soft brush to brush away the dust. If your Philips Air Purifier contains a cylindrical filter, please clean the pre-filter (filter surface) with a vacuum cleaner.
You can also find step-by-step instructions specific to your model in the User Manual.
The windows are open
If the windows are open and polluted air continues to come in from outside, your purifier might not be able to improve the air quality. Please try to close all the doors/windows while operating the air purifier for at least four hours and select the highest speed mode. If the PM2.5 level is higher than 150, please use the product on the highest fan speed/in turbo mode
The room is too big
The room in which you use the air purifier is larger than the maximum size that the appliance can purify effectively. Make sure that the size of the room does not exceed the maximum size indicated for your air purifier model.
New furniture in the room
When adding new furniture to a room, the air quality might be affected by gases emitted. These gases should disappear gradually within a few weeks.
Check sensitivity mode (applies to AC4014 to AC4372 only)
Please operate the appliance in standard mode.
No airflow or the airflow is very weak from the air circulation outlet (Only for AMF765, AMF86x, AMF87x)
If you notice that the airflow from the air circulation outlet is weak (indicated as A in the below image), please check if the appliance is on cooling/heating function or if any objects are stuck at the air circulation outlet.
If there is no airflow from both the front air outlet and the air circulation outlet, please check if the filter package has been fully removed.
Did these steps not solve the issue? Please contact us for further assistance.
By clicking on the link, you will be leaving the official Royal Philips Healthcare ("Philips") website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. Philips makes no representations or warranties of any kind with regard to any third-party websites or the information contained therein.