GlideLight
Laser sheath
GlideLight
Laser sheath
Safely and efficiently removing leads depends on tools that give you versatility and control. GlideLight laser sheath offers the unprecedented ability to customize the laser’s repetition rate throughout a procedure. At 80Hz, the GlideLight laser sheath requires up to 55% less advancement force,¹ and advance up to 62% more efficiently through tough binding sites than SLS II.²
Safely and efficiently remove leads
Customize the laser's repetition rate throughout procedure
Use up to 55% less advancement force¹
Clinical image gallery
- GlideLight laser sheath
Features
Versatility
No two lead removal procedures are the same. Each binding site is unique, lead designs vary, and every patient’s anatomy is different.
Efficiency
Stalled progression during lead removal procedures can lengthen the time they take to complete. GlideLight laser sheath may enable smoother and more consistent progression.
Control
Using a high degree of mechanical force when removing leads can compromise lead integrity.³⁻⁶ GlideLight laser sheath provides critical control when progressing through binding sites.⁷
Specifications
- Model Number 500-301
- Sheath size
- 12 F
- Maximum target lead diameter
- 7.5 F / 0.098" / 2.50 mm
- Minimum tip inner diameter
- 8.3 F / 0.109" / 2.77 mm
- Maximum tip outer diameter
- 12.5 F / 0.164" / 4.17 mm
- Working length
- 50 cm
- Repetition rate
- 25-80 Hz
- Clinical energy setting
- 30-60 mJ/mm
- Model Number 500-302
- Sheath size
- 14 F
- Maximum target lead diameter
- 9.5 F / 0.124"/ 3.17 mm
- Minimum tip inner diameter
- 10.2 F /0.134" / 3.40 mm
- Maximum tip outer diameter
- 14.7 F / 0.192" / 4.88 mm
- Working length
- 50 cm
- Repetition rate
- 25-80 Hz
- Clinical energy setting
- 30-60 mJ/mm
- Model Number 500-303
- Sheath size
- 16 F
- Maximum target lead diameter
- 11.5 F / 0.150" / 3.83 mm
- Minimum tip inner diameter
- 12.5 F / 0.164" / 4.17 mm
- Maximum tip outer diameter
- 17.2 F / 0.225" / 5.72 mm
- Working length
- 50 cm
- Repetition rate
- 25-80 Hz
- Clinical energy setting
- 30-60 mJ/mm
- SLS II model number 500-001
- Max. target lead diameter
- 7.5 F / 0.098" / 2.50 mm
- Min. inner tip diameter
- 8.3 F / 0.109" / 2.77 mm
- Max. outer tip diameter
- 12.5 F / 0.164" / 4.17 mm
- Working length
- 50 cm
- Repetition rate
- 20-40 Hz
- Clinical energy setting
- 30-60 mJ/mm
Recommended products
- Philips Laser System —Nexcimer— photoablates a wide spectrum of morphologies. Philips laser catheters are indicated in many vessel types and is the only laser system available for lead removal. Powered by a common 100-240V electrical outlet, the system warms up in less than 30 seconds for an easy and fast set-up.
Disclaimer
1. Comparison of average peak push forces required to advance Laser Sheath at 40Hz vs. 80Hz Pulse Repetition Rate through simulated fibrosis material at an advancement rate of 1.0 mm/second. D015722, Data on file at Philips
2. Comparison of ablation force vs. advancement rate of Laser sheath 40Hz vs. 80Hz by use of the data collected in D015786, Data on file at Philips
3. Maytin M, Epstein, L (2011). The challenges of transvenous lead extraction. Heart, 97(5): 425-34.
4. Henrikson, C.A., et al. (2008). How to prevent, recognize, and manage complications of lead extraction. Part III: Procedural factors Heart Rhythm. Jul;5(7):1083-7. Epub 2007 Oct 9.
5. Smith MC, Love CJ. Extraction of transvenous pacing and ICD leads. Pacing Clin Electrophysiol 2008:31:736-52.
6. Wilkoff, B.L., et al. (1999). Pacemaker lead extraction with the laser sheath: Results of the Pacing Lead Extraction with Excimer Sheath (PLEXES) trial. JACC, 33(6), 1671-1676.
7. Reduced advancement force lowers the forces applied to leads during extraction, D015861-01, Data on file at Philips
8. Design Verification Report for Ablation Force Testing. D015722, Data on file at Philips.